Key Features

l  Dedicated channels for inlet port leak testing, outlet port pressure validation and pilot actuation

l  Integral valve sensors for test verification purposes

l  Pilot ramps test to ensure pressure and time measurables are acceptable

l  用于进气口泄漏测试，出口压力验证和先导驱动的专用通道

l  整体式阀门传感器，用于测试验证

l  先导斜坡测试，以确保压力和时间可测量是可以接受的

The FCS539 contains all the required pneumatics to interface FCO750 Leak Detectors with the ports of changeover valves, allowing efficient automatic testing of these parts.

FCS539包含所有必需的气动装置，可将FCO750泄漏探测器与转换阀的端口连接，从而实现对这些部件的高效自动测试。

The FCS539 is controlled by the FCO750’s programmable outputs, driving the required pneumatic / electrical pilots required to control specified pneumatic and solenoid valves on a test by test basis. The respective electrical input signals of the FCO750 ensure internal valves within the FCS539 are in the correct state via the use of optical sensors.

FCS539由FCO750的可编程输出控制，驱动所需的气动/电气控制器，以便在测试基础上控制指定的气动和电磁阀。FCO750的相应电气输入信号通过使用光学传感器确保FCS539内的内部阀门处于正确状态。

An integral gauge pressure switch within the FCS539 verifys the outlet air is either on or off at the expected stage of test. If it is not as expected, a failure is indicated to the operator, much like any other potential defect such as; excessive pressure loss to atmosphere, leaks to adjacent ports or ramp test fail scenarios. Testing of changeover valves requires pressure decay testing at three different pressures, which is achieved using an automatic pressure regulator. Vacuum can also be applied if required.

FCS539内的一体式表压开关可确保在预期的测试阶段打开或关闭出口空气。如果不符合预期，则向操作员指示故障，就像任何其他潜在缺陷一样;大气压力损失过大，相邻端口泄漏或斜坡测试失败情况。转换阀的测试需要在三种不同压力下进行压力衰减测试，这是使用自动压力调节器实现的。如果需要，也可以施加真空。

The FCS539, provides you with a multifunction Leak Detection system which suits a wide variety of valve configurations and styles. It not only improves the quality and consistency of testing but also allows an increase in production speed.

FCS539为您提供多功能泄漏检测系统，适用于各种阀门配置和样式。它不仅提高了测试的质量和一致性，而且还提高了生产速度。

The optional barcode reading function on the FCO75x series of machines also allows you to trace batch ID, operator ID, product ID and serial number data points.